|
This convenient oil-based solvent saves
time and money for general service and
repair shops. It will prevent contaminating
new or rebuilt transmissions you install.
FOR PEOPLE WHO DON'T HAVE A
DEDICATED COOLING LINE FLUSHER
A three in one product
The flush can is used to prevent transmission
contamination by removing and eliminating
contaminants such as grease, dirt, sludge,
grime and metal shavings in transmission
cooling systems and lines, without leaving
any water or soapy residue in the system.
It also cleans electric parts, wire harnesses,
etc. leaving a thin layer of dielectric
protectant.
Benefits
- Leaves no soapy residue
- Contains no water
- Prevents contamination
- Prevents costly comebacks
- Contains no ozone depleting chemicals
or CFCs
- Contains no chlorinated solvents
- Easy to Use
Directions for Use
For Line Flush Cleaner:
Attach connector to transmission feed
line. Next, attach hose to transmission
return line to collect flush and residue
in a waste container. Hold can upright
and actuate. Flush until clear. For best
results use entire content of can per
installation. Then turn can upside down
and continue cleaning with air only.
For Wire Harness Cleaner:
Cut off hose to appropriate length to
direct the stream. Spray over dirty depowered
6-12 volt electrical components.
For Dielectric Protectant:
Allow cleaned components to dry before
repowering.
|
